WwPerforming maintenance on Center Module | Panasonic WX-CC411

Browser Operation

wwPerforming maintenance on the

Center Module

This screen is used to check the status of and perform maintenance on each device. The maintenance menu is for maintenance staff.

To display this screen, click the [Maintenance] button in the Setup menu panel.

qqChecking the Center Module [Status]

This tab displays the status of the Center Module DECT ID, MAC address and UPnP.

Click the [Maintenance] button, then the [Status] tab.

[DECT ID]

Displays the DECT ID of the Center Module.

[MAC address]

Displays the MAC address of the Center Module.

UPnP

[HTTP]

Displays the information for an HTTP connection.

pp[Port number]

Displays the port number set for port forwarding in UPnP.

pp[Status]

Displays the port forwarding status. Displays “-” during an HTTPS connection.

[HTTPS]

Displays the information for an HTTPS connection.

pp[Port number]

Displays the port number set for port forwarding in UPnP.

pp[Status]

Displays the port forwarding status. Displays “-” during an HTTP connection.

[Router global address]

Displays the global address of the router.

28

Image 28

Panasonic WX-CC411 WwPerforming maintenance on Center Module, QqChecking the Center Module Status, Pp Port number

Contents

Operating Instructions Browser Guide Contents WwFeatures WwSystem diagramBefore use WwPreface Single lane WwOperationDual lane WwConcerning the Operating Instructions Tandem lane WwTrademarks and registered trademarks WwSystem requirementsWwAbbreviations Operating precautions WwRouterWwBrowser Refresh Rate WwBrowser Compatibility Network WwExamples of connectionsWwNetwork Security QqDirect connection to the PC WwSetup Instructions WwConnecting the Center Module via a PCBrowser Operation Setup menu WwSetup MenuWwOperation Screen WwConfiguring and Confirming Settings at Installation MaintenanceQqConfirming the date and time setting Date & time NTP/ Time zone IPv4 Network QqConfiguring network settings NetworkWeb server QqConfiguring server settings Server UPnP Time adjustment interval time Authentication Pp TypePp User password NTP server address QqSetting Network Cameras connected to the unit Camera Camera 1 to Configuring Help contact email transmission settings QqSetting Help contact Help contactQqSetting Site information Site info WwConfirming store settings QqConfirming nighttime volume settings Nighttime volumeNighttime volume Level -20 to 0 dB QqConfirming store hours Store hours Store hoursClosed message Holiday message Input volume Output volumeAux speaker Device for Line WwConfirming message settings QqConfirming greeter message settings Greeter message Message list Schedule list Pp Group QqConfirming reminder message settings Reminder messagePp AUX Interval Start Ending timeInterval time QqConfirming alert message settings Alert message Destination Pp Group WwConfirming the security alert settings List of alerts Mail for Alert * * 1 to Remaining capacity WwBacking up settings WwConfirming quick operation settingsLane a setting Lane B setting WX‑CC412 only WwPerforming maintenance on Center Module QqChecking the Center Module StatusPp Port number Pp Status Reboot Message Meaning Action QqRetrieving log data Log Delete checkboxFile column Lane column QqSetting authentication User mng QqConfirming the software version UpdateUser ID change Password change Old passwordNew password Confirm new password WwChecking the status of All-In One Headsets and Belt Packs Information display menuWwChecking the status of alerts QqChecking the status of security alerts Security alert QqChecking the status of system alerts System alert Troubleshooting Pp Is default gateway set for the network? Pp Is port forwarding set for the router?Center Module cannot be Pp Has an SD card been inserted? F0114-0 PGQP1741ZA