Panasonic WX-CC411 NTP server address, NTP port, Time adjustment interval time, Time zone

Browser Operation

[NTP server address]

If “Manual” is selected for [NTP server address (Manual

/Auto)], enter the NTP server IP address or host name manually.

Number of characters: 1 to 128

Types of characters: alphanumeric, characters -.

Default setting: None (blank)

Important

ppWhen entering the host name into the “NTP server address”, the DNS setting must be configured on the [Network] tab of the [Installation] button on the Setup menu panel.

[NTP port]

Input the NTP server port number.

Settable port numbers: 1 to 65535

Default setting: 123

Important

ppThe following port numbers cannot be used. (Excluding the port number set in the default settings.) 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

[Time adjustment interval time]

Select the interval for retrieving the time from the NTP server (1 hour units, from 1 to 24 hours).

Default setting: 1h

[Time zone]

Select the time zone corresponding to the region in which this unit is being used.

Default setting: GMT-06:00 Central Standard Time

SMTP

Configure the settings of the email server for sending emails from the Center Module.

[Default] button

This button is used to restore the SMTP settings to the default settings.

[SMTP server address]

Input the IP address or host name of the SMTP server for sending email.

Number of characters: 1 to 128

Types of characters: alphanumeric, characters -.

Default setting: None (blank)

[SMTP server port]

Input the port number for sending email.

Settable port numbers: 1 to 65535

Default setting: 25

Important

ppThe following port numbers cannot be used. (Excluding the port number set in the default settings.) 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

[Authentication]

ppType

Select one of the following authentication methods for sending email.

None:	No authentication
POP before SMTP:
	Authenticate the POP servers for
	receiving email before sending email.
SMTP:	Authenticate the SMTP server.

Default setting: None

Note

ppIf unsure of which authentication type to use for sending email, inquire with the system administrator.

ppUser name

Input the username for accessing the server. Number of characters: 0 to 32

Types of characters:	alphanumeric, characters
	!#$%'()=˜¦`{}<>?_-^[]/@*,.+

Default setting: None (blank)

ppUser password

Input the password for accessing the server.

Number of characters:	0 to 32
Types of characters:	alphanumeric, characters
	!#$%'()=˜¦`{}<>?_-^[]/@*,.:;+¥

Default setting: None (blank)

[POP3 server address]

If [POP before SMTP] is selected for [Authentication Type], input the POP3 server IP address or host name manually. Number of characters: 1 to 128

Types of characters: alphanumeric, characters -.

Default setting: None (blank)

14