Browser Operation
qqConfiguring network settings [Network]
This function is used to configure the network settings of the Center Module.
Click the [Installation] button, then the [Network] tab.
IPv4 Network
[DHCP / Static]
Displays the DHCP of the Center Module. This setting can be changed through operations on the Center Module. DHCP: Operating with the DHCP setting ON.
Static: Operating with the DHCP setting OFF (static IP address).
[MAC address]
Displays the MAC address of the Center Module.
[IP address]
Displays the IP address of the Center Module. This setting can be changed through operations on the Center Module.
[Subnet mask]
Displays the subnet mask of the Center Module. This setting can be changed through operations on the Center Module.
[Default gateway]
Displays the default gateway of the Center Module. This setting can be changed through operations on the Center Module.
[DNS Auto / Manual]
Set whether to retrieve the DNS server address automatically (“Auto”) or input it manually (“Manual”). When set to “Manual”, the DNS setting must be configured. When using the DHCP function, if “DNS” is set to “Auto”, the DNS server address will be retrieved automatically. Inquire with the system administrator for questions about settings. Default setting: Manual
[Primary DNS server address], [Secondary DNS server address]
If “DNS” is set to “Manual”, the IP address of the DNS server must be entered manually.
Inquire with the system administrator for questions about the DNS server IP address.
Default setting: None (blank)
[Line speed]
Displays the network transmission rate setting of the Center Module. This setting can be changed through operations on the Center Module.
Web server
[Connection]
Select the method for connecting to the Center Module. HTTP: Can only connect by HTTP.
HTTPS: Can only connect by HTTPS.
Default setting: HTTP
[HTTP port]
Set the port number to be used in HTTP.
Settable port numbers: 1 to 65535
Default setting: 80
[HTTPS port]
Set the port number to be used in HTTPS.
Settable port numbers: 1 to 65535
Default setting: 443
Important
ppIf Web server settings are altered, the Center Module
will restart automatically.
ppIf HTTPS is selected, the Center Module will automatically generate an SSL server certificate. This
is only compatible with SSL
ppThe following port numbers cannot be used. (Excluding the port number set in the default settings.) 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
12
