Browser Operation
[Sender’s E-mail address]
Input the sender’s email address. The email address entered will appear in the “From” line on the email being sent. Number of characters: 3 to 128
Types of characters: alphanumeric, characters @ . _ ‑
Default setting: None (blank)
qqSetting Network Cameras connected to the unit [Camera]
This tab is used to set Network Cameras displayed on the LCD display of the Center Module. Setting Network Cameras enables camera images from vehicle detectors to be displayed on the Center Module in tandem with security alerts.
Click the [Installation] button, then the [Camera] tab.
Camera 1 to 4
A maximum of four Network Cameras can be connected to the Center Module. This section describes how to set Network Cameras connected to the unit.
Important
ppNetwork Cameras that can be connected to the Center Module are Panasonic
Cameras.
ppBe sure to set HTTP for the Network Camera
connection method setting.
ppConfigure the Network Cameras to the following settings:
·Aspect ratio: 4:3
·Image quality: standard
[Delete] button
This button is used to restore the Network Camera settings to the default settings.
[IP address]
Input the IP address of the Network Cameras that are connected to the unit.
Default setting: None (blank)
[HTTP port]
Input the port number of the Network Cameras that are connected to the unit.
Settable port numbers: 1 to 65535
Default setting: 80
[Authentication]
Configure this setting if the user authentication setting is set to “ON”.
ON:
OFF:
[User name]
If [ON] is selected for [Authentication], input the username for accessing the Network Cameras.
Number of characters: 0 to 32
Default setting: None (blank)
[User password]
If [ON] is selected for [Authentication], input the password for accessing the Network Cameras.
Number of characters: 0 to 32
Default setting: None (blank)
15
