Paradyne 1740 SHDSL manual PPPoA

1740 SHDSL 2/4-Wire Router User’s Guide

3.2.4PPPoA

When a VC is configured for PPPoA, the router will auto-detect the Authentication code (PAP or CHAP), and the NAPT function will be enabled automatically.

STEP 1: Click WAN Setup on the Basic menu bar.

STEP 2: Enter values for the following fields: VPI, VCI, Encapsulation (LLC or VC MUX), Enable NAPT.

VPI	Enter a value for the vitual path identifier
VCI	Enter a value for the virtual channel identifier
LLC Encapsulation:	With LLC encapsulation, a link control header is added to the
	Ethernet packet that identifies the protocol type (Ethernet). This
	allows multiple protocols to be transmitted over the ATM Virtual
	Circuit.
VC Multiplexing:	With VC Multiplexing, no link control header is needed as the
	ATM Virtual Circuit is assumed to be carrying a single protocol.
Enable NAPT	Selecting Enabling NAPT will enable Network Port Address
	Translation on the WAN interface.
Keepalive Interval(sec):	Keep-alive is a networking operation that periodically checks
	the availability of a PPPoE/PPPoA connection between the CO
	and CPE. If the keep-alive message is not acknowledged, the
	connection will be interrupted.

STEP 3: Click PPPoA, and type the user name and password that the remote subscriber needs for Internet access.

STEP 4: Click on the Add button. The new VC is added in the Current ATM PVC List on the bottom screen.

24 July 2004 1740-A2-GB20-00