Paradyne 1740 SHDSL manual Save the Configurations, Login

1740 SHDSL 2/4-Wire Router User’s Guide

16.1.7Save the Configurations

The new parameters can function immediately without being saved to the flash memory. However, to use these parameters after you restart the router, you must save them to the flash memory.

To write the configurations, enter MAIN/WRITE and press the Y key. After saving the configurations, you will be prompted if you need to reboot the device. Press the Y key to reboot the device or press the N key to keep operating the device.

16.1.8Login

STEP 1: Configure your workstation to the same network segment as the router, such as IP address 192.168.1.133 and subnet mask 255.255.255.0.

1740-A2-GB20-00 July 2004 71