1740 SHDSL
3.2.2Router Mode: Service for Five Static IP Addresses
To set up the service for five static IP addresses, you need to set up the VC in RFC 1483 Routed mode.
STEP 1: Click WAN Setup on the Basic menu bar.
STEP 2: Enter values for: VPI, VCI, Encapsulation (LLC or VC MUX), Enable NAPT.
VPI | Enter a value for the vitual path identifier |
|
|
VCI | Enter a value for the virtual channel identifier |
|
|
LLCEncapsulation: | With LLC encapsulation, a link control header is added to the |
| Ethernet packet that identifies the protocol type (Ethernet). This |
| allows multiple protocols to be transmitted over the ATM Virtual |
| Circuit. |
|
|
VC Multiplexing: | With VC Multiplexing, no link control header is needed as the |
| ATM Virtual Circuit is assumed to be carrying a single protocol. |
|
|
Enable NAPT | Selecting Enabling NAPT will enable Network Port Address |
| Translation on the WAN interface. |
|
|
STEP 3: Click on the RFC 1483 Routed option.
18 | July 2004 |
