Issue 2 December 1996 B-15

±±Circuit Quality Group (dev 4)

±±Type Definition for Circuit Quality Validity indicators

±±Validity is not-used(6) if not supported by device type.

CirQualValidity ::=

INTEGER { valid(1), valid-greater-than(2), valid-less-than(3),

not-valid-for-modulation-mode(4), not-valid-for-multipoint-mode(5), not-available-yet(6), count-overflow(7),

not-used(8)

}

±± Bit Error Rate

devCirQualBitErrorRateValidity OBJECT-TYPE SYNTAX CirQualValidity

ACCESS read-only STATUS mandatory

ºValidity of the devCirQualBitErrorRate object.º ::= { devCirQual 1 }

devCirQualBitErrorRate OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

ºBit error rate. Expressed as errors per billion (1E9) bits.º

::= { devCirQual 2 }

±± Mean Squared Error

devCirQualMeanSquareErrorValidity OBJECT-TYPE SYNTAX CirQualValidity

ACCESS read-only STATUS mandatory

Paradyne 3700-A2-GB20-10 manual Issue 2 December 1996 B-15