Paradyne 3700-A2-GB20-10 manual Issue 2 December 1996 A-13

MIB Definition

±±NMS Test Group (nms 5)

±±Textual Convention for Test Result Validity Indicator

TestResultValidity ::=

INTEGER { valid-final(1), valid-intermediate(2), not-available-yet(3), count-overflow(4), not-used(5)

}

±± Number of Test Table Entries

nmsTestEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

ºThe number of NMS Test table entries that are configured. This number is controlled by the following lines in

the 6700 profile (default value is shown).

[SNMP]

NmsTestEntries=8º ::= { nmsTest 1 }

±± Test Table

nmsTestTable OBJECT-TYPE

SYNTAX SEQUENCE OF NmsTestEntry ACCESS not-accessible

STATUS mandatory

DESCRIPTION

ºThe NMS Test table uses RMON-style arbitration (RFC 1271) to allocate device test slots. There are 8 (by default) simultaneous test slots available.

Each test slot controls testing of a single device (or a control-tributary pair, depending on the test type).º

::= { nmsTest 2 }

Issue 2 December 1996 A-13