Paradyne 3700-A2-GB20-10 manual 34Issue 2 December

Device Enterprise MIB Definition

±±Command Group (dev 7)

±±Dial an Entered or Stored Number

devCommandDial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write

STATUS mandatory

DESCRIPTION

ºSetting this attribute will cause the modem to dial the entered number. To dial a stored number, the string must begin with 'd', followed by the call directory entry number. This variable will always return a zero-length string.º

::= { devCommand 1 }

±± Disconnect Call or Service

devCommandDisconnect OBJECT-TYPE SYNTAX INTEGER {

disconnect-call(1), disconnect-service(2), unknown(3)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

ºSetting this attribute to disconnect-call(1) will cause the current call to be disconnected. Setting this attribute to disconnect-service(2) will cause service disconnect. This object will always return a value of unknown(3).º

::= { devCommand 2 }

±± Change Busy State

devCommandBusy OBJECT-TYPE SYNTAX INTEGER {

set-busy(1), clear-busy(2), unknown(3)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

B-34Issue 2 December 1996