Paradyne 3700-A2-GB20-10 manual Issue 2 December 1996 A-19

MIB Definition

::= { nmsTestEntry 6 }

±±

±±Test Status

nmsTestStatus OBJECT-TYPE SYNTAX INTEGER {

idle(1),

testMode(2),

testRunning(3),

testAborted(4),

testFailed(5)

}

ACCESS read-only STATUS mandatory

DESCRIPTION ºTest status.

Status of idle(1) indicates that the device is not in test mode (from this control point); this is the initial value after createRequest. Status of testMode(2) indicates that the device is in a test mode (such as loopback); no further test results are pending. Status of testRunning(3) means the device is in test mode (such as bert test) and test results are pending. Status of testAborted(4) indicates that the device test was aborted and the device is no longer in test mode. Status of testFailed(5) indicates that the test has failed. Reason for test failure may be: invalid test parameter; device locked by another user; conflict with device environment, features, or configuration; device failure.º

::= { nmsTestEntry 7 }

±±Test Results

±±Local Total Seconds

nmsTestLocalTotalSecondsValidity OBJECT-TYPE SYNTAX TestResultValidity

ACCESS read-only STATUS mandatory

DESCRIPTION

ºValidity of the nmsTestLocalTotalSeconds test result object.º ::= { nmsTestEntry 8 }

Issue 2 December 1996 A-19