Paradyne 7510 DSU manual Switching to the Screen Function Key Area, Example

Using the Asynchronous Terminal Interface

Switching to the Screen Function Key Area

Selecting Ctrl-a allows you to switch between the two screen work areas to perform all screen functions.

"Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line. The available selections for the first input field appear on the last line as shown below.

2.Select either the function's designated (underlined) character or press the tab key until you reach the desired function key.

Example:

To reset the Monitor 511 error counter to zero, type r or R (ResetMon).

3.Press Return. The function is performed.

4.To return to the screen area above the dotted line, press Ctrl-a again.

main/test/network
Device Name:					Model: 7510
			NETWORK TESTS
	Test	Command	Status	Result
	CSU Loopback:	Start	Inactive	0:00:00
	DSU Loopback:	Start	Inactive	0:00:00
	Send V.54 Up:	Send	Sending
	Send V.54 Down:	Send	Inactive
	Send 511:	Start	Inactive	0:00:00
	Monitor 511:	Stop	Active	125:08:48	Errors 99999+

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
ResetMon

7510-A2-GB20-10 November 1997 2-7