6-1
7510-A2-GB20-10 November 1997
Messages and Troubleshooting 6Messages and Troubleshooting
There are many messages available to assess the status of the device and
contribute to problem resolutions. Refer to the following sections:
Responding to Device Messages
Troubleshooting
Responding to Device Messages
The Device Messages in Table 6-1, listed in alphabetical order, may appear in the
messages area at the bottom of the ATI screens.
Table 6-1. Device Messages (1 of 2)
Device Message What Message Indicates What To Do
Command Complete Action requested has
successfully completed. No action needed.
Invalid Character
xA nonprintable ASCII
character has been
entered.
Reenter information using valid
characters.
Invalid – Network
Initiated CSU (or DSU)
Loopback Active
Network-initiated loopback
was in progress when
another selection was
made.
No action needed.
Invalid – [Test]
Already Active [Test] can be a CSU, DSU,
or DTE Local Loopback, or
a Send 511 or Monitor 511.
The [test] was already in
progress when another
selection was made.
Allow test to continue.
Select another test.
Stop the test.