Using the Asynchronous

Terminal Interface

2

Connecting to the Terminal Port

The device used for the Asynchronous Terminal Interface (ATI) can be a VT100-compatible async terminal, or a PC running emulation software. The terminal or PC can be connected to the Terminal port directly, or through an external modem.

Ensure that the device you connect communicates using these settings:

HData rate set to 9.6 kbps.

HCharacter length set to 8.

HParity set to None.

HStop Bits set to 1.

Terminal port settings cannot be changed from the ATI.

7510-A2-GB20-10

November 1997

2-1

Page 11
Image 11
Paradyne 7510 DSU manual Using the Asynchronous Terminal Interface, Connecting to the Terminal Port