Paradyne 7510 DSU manual Saving Configuration Options, If you select Then

Customizing the DSU

"Procedure

To enter Device Name screen information:

1.Position the cursor in the Device Name field. Enter a name unique in your system to identify the unit.

The maximum length of Device Name is 20 characters.

2.Position the cursor in the System Name field. Enter a name unique in your network to identify the system.

The maximum length of System Name is 127 characters.

3.Position the cursor in the System Location field. Enter the physical location of the system.

The maximum length of System Location is 127 characters.

4.Position the cursor in the System Contact field. Enter the name and contact information for the person responsible for the unit.

The maximum length of System Contact is 127 characters.

5.Save the Device Name screen information as shown in the next section.

Saving Configuration Options

When changes are made to the configuration options, the changes must be saved to take effect. Use the Save key or Save Configuration screen.

"Procedure

To save configuration options changes:

1.Press Ctrl-a to switch to the screen function key area below the dotted line.

2.Select Save and press Return.

NOTE:

When Exit is selected before Save, a Save Configuration screen appears requiring a Yes or No response.

If you select . . .	Then . . .
Yes	The configuration is saved.
No	The Main Menu appears and changes are not saved.

3-2 November 1997 7510-A2-GB20-10