Monitoring the Unit
Board Status
Board Status option from the Main Menu displays HDSL circuit operational status.
Enter 1 at the Main Menu Command prompt to display board status.
Command→ 1 |
|
T1 STATUS: | Network is UP |
LOOPBACK STATUS: OFF | |
HDSL STATUS: | LOOP A is UP, LOOP B is UP |
S/N RATIO: | Loop A = 44.0 dB, Loop B = 43.5 dB |
Command→ |
|
| |
Board Status for | |
|
|
Command→ 1 |
|
DTR: | ACTIVE |
DSR: | ACTIVE |
LOOPBACK STATUS: OFF | |
HDSL STATUS: | LOOP A is UP, LOOP B is UP |
S/N RATIO: | Loop A = 44.0 dB, Loop B = 43.5 dB. |
Command→ |
|
|
|
Board Status for V.35-Compatible Unit
HT1 STATUS displays one of the following:
ÐNetwork is Up
ÐReceive Carrier Loss
ÐReceive Remote Alarm
ÐReceive Unframed All 1's.
HDTR and DSR are either ACTIVE or INACTIVE. DSR becomes active in response to DTR (with HDSL loops up and data transmission possible).
HLOOPBACK STATUS is either ON or OFF.
HHDSL STATUS displays whether each loop is UP, DOWN, or DISABLED.
HS/N
October 1997 |
