VoIP Vlan Conﬁguration, SIP Parameters | Patton electronic SL4020

SmartLink 4020 Getting Started Guide	6 • Telephony

VoIP VLAN Conﬁguration

This sub-page allows conﬁguration of speciﬁc VLAN tags that are to be applied to all SIP signalling and RTP packets used for VoIP calls. These VLAN settings will override any general VLAN settings applied to

the interface.

Figure 26. VoIP VLAN Conﬁguration section of the SIP window

SIP Parameters

Figure 27. SIP Parameters section of the SIP window

Hook Flash MIME Type

This is the MIME Type to be used in a SIP INFO message used to signal hook ﬂash event.

SIP Timer Values (sec)

SIP T1. RFC 3261 T1 value (RTT estimate). Range: 0–64 seconds.

SIP T2. RFC 3261 T2 value (maximum retransmit interval for non-INVITE requests and INVITE responses). Range: 0–64 seconds.

SIP T4. RFC 3261 T4 value (maximum duration a message will remain in the network). Range: 0–64 sec- onds.

RTP Parameters

RTP Port Min and RTP Port Max deﬁne a range that contains at least four even-numbered ports (100–106, for example).

SIP

54

Image 54

Patton electronic SL4020 manual VoIP Vlan Conﬁguration, SIP Parameters, Hook Flash Mime Type, SIP Timer Values sec

Contents

SL4020 Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony Codecs System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables About this guide AudienceStructure Precautions Safety when working with electricity Typographical conventions used in this document General observationsGeneral conventions SmartLink 4020 Getting Started GuideAbout this guide Chapter contents General information SmartLink 4020 overview SmartLink SmartLink installation Installing the router Do the following Connect to the Internet service provider Connecting the SmartLink to the network Home System information System Uptime System information System Status Network-WAN Network-WAN Network Settings StatusInterface Status Settings Obtain WAN conﬁguration dynamically Device Operating ModeInternet Conﬁguration Specify ﬁxed WAN conﬁguration Settings Enable PPPoEAuthentication WAN PPPoE Conﬁguration MAC Spooﬁng Conﬁguration MTU SizeInternet Vlan Conﬁguration Saving your work QoS Quality of ServiceEnable Voice QoS Assured Bandwidth for Voice ToS/DiffServ TOS/DiffServ window IPSec Conﬁguration Outbound ESP Authentication Algorithm Outbound AH Authentication AlgorithmOutbound AH Authentication Key HEX Outbound ESP Authentication Key HEX Inbound ESP Authentication Key HEX Network-LAN Dhcp Static Address Assignment Server SettingsClient Network Information Viewing the Dchp Client Table Static Routing RoutingDynamic Routing Viewing the Routing Table Port Forwarding to LAN Port ForwardingReserved Ports De-Militarized Zone Service Access IP FilteringFilter IP Range Ping Reply Telephony Telephony Line 2 Speed Dial Settings Speed Dial Serv VoIP Status VoIP Server Registration StatusPhone Line Status SIP Server Settings Gateway SettingsSIP Conﬁguration SIP Extensions RTP Telephone Event Conﬁguration SIP Parameters SIP Timer Values secVoIP Vlan Conﬁguration Hook Flash Mime Type NAT Traversal Audio/CODEC Conﬁguration PacketizationJitter Buffer Phone Number Phone 1 & PhoneUser Information User Name Supplementary Service Settings MWI Serv Call Transfer ServIP Dialing Serv Speed Dial Serv Call Forward Settings Dial Out Type Http Digest Setting Selective Call Forward SettingsDistinctive Ring Settings Incoming Call Block Line 1 Speed Dial Settings Speed DialSpeed Dial 1-8 Phone Number/IP Dialing Line 2 Speed Dial Settings System System System New User Password Set Security PasswordNew Root Password Conﬁrm new password Conﬁguration Logging Manual Upgrade Auto UpgradeEnable Auto Upgrade Auto Upgrade URL Auto Upgrade ProtocolUpgrade Server Localization Distinctive Ring Setting Supplementary Service Keys DND Act Keys Dist Ring Act KeysWarm Line Act Keys IP Dialing Act Keys Control Timer Values Ring Setting Miscellaneous Snmp Conﬁguration FXS Port Polarity ConﬁgurationSnmp Trap Conﬁguration Snmp Community Conﬁguration Snmp System Conﬁguration Reload Documentation Introduction Documentation link Logout Logout window Contacting Patton for assistance Warranty coverage Contact informationPatton support headquarters in the USA Return for credit policy Out-of-warranty serviceReturns for credit RMA numbers Appendix a Compliance information Compliance FCC Warning Radio and TV InterferenceCE-Mark Warning Appendix B Speciﬁcations Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem Support Management Voice Services/FeaturesIP Services Operating Environment Appendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial Plan Sample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Ring Cadence Conﬁguration Following is a sample ring cadence patter conﬁguration