SmartLink 4020 Getting Started Guide | 7 • System |
|
|
Auto Upgrade Protocol
Select the protocol for auto upgrade
Upgrade Server
Specify the auto upgrade server IP address
Auto Upgrade URL
Specify the auto upgrade server by URL. This field is dependent on the auto upgrade service package installa- tion. The default value is iadmgr.
Localization
The Localization window contains the following sections:
•Call Progress Tones (see figure 43)
•Distictive Ring Setting (see figure 44 on page 71)
•Supplementary Service Keys (see figure 45 on page 72)
•Control Timer Values (see figure 46 on page 74)
•Ring Setting (see figure 47 on page 75)
•Miscellaneous (see figure 48 on page 75)
•FXS Port Polarity (see figure 49 on page 76)
Note After configuring the sections, click the Save button (see figure 49 on page 76) to save the new configuration.
Call Progress Tones
Choose the correct country for a proper impedance match, as well as the NTP Server, and Time Zone. Select Adjust clock for daylight savings if applicable.
Figure 43. Call Progress Tones section of Localization window
Localization | 70 |
