SmartLink 4020 Getting Started Guide | E • Ring Cadence Configuration |
|
|
Introduction
The following is a sample ring cadence patter configuration:
Timeval ::= time in milliseconds
Repeatval ::= # of cycles to repeat
Tonename ::= "RING_0" "RING_1" "RING_2" "RING_3" "RING_4"
"RING_5" "RING_6" "RING_7" "RING_8" "RING_9" Idle ::= "IDLE"
Active ::= "ON" "OFF"
Inactive ::= Idle "(" Timeval ")" Active ::= Active "(" Timeval ")" Sequence ::= Active Active "," Sequence Repetition ::= "[" Sequence "]" Repeatval Repeat ::= "R"
Cycle ::= Sequence Repetition
Fullsequence ::= Cycle Cycle "," Fullsequence
Cadence ::= Fullsequence Fullsequence "," Repeat Fullsequence "," Inactive "," Repeat
Ring ::= Cadence
For the ring cadence pattern above, the configuration would be:
RING_0 ON(200),OFF(300),ON(100),OFF(400),ON(200),OFF(4000),R
Note The Bellcore standard ring cadence patterns are shown in table 3.
| Table 3. Bellcore standard ring cadence patterns |
|
|
Name | Value |
|
|
RING_0 | ON(2000), IDLE(4000), R |
|
|
RING_1 | ON(800), OFF(400), ON(800), IDLE(4000), R |
|
|
RING_2 | ON(400),OFF(200)]2,ON(800),IDLE(4000),R |
|
|
RING_3 | ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R |
|
|
RING_4 | ON(500) |
|
|
RING_5 |
|
|
|
Introduction | 97 |
