SmartLink 4020 Getting Started Guide | Table of Contents |
|
|
Enabled | 31 |
Service | 31 |
Protocol | 31 |
Interface Status | 31 |
Network Settings | 31 |
Dynamic IP Assignment | 31 |
IP address | 31 |
MAC address | 31 |
Subnet Mask | 32 |
Default Gateway | 32 |
Domain name | 32 |
DNS address | 32 |
VLAN | 32 |
Priority Tag | 32 |
Settings | 32 |
Internet Configuration | 33 |
Device Operating Mode | 33 |
Obtain WAN configuration dynamically | 33 |
Specify fixed WAN configuration | 33 |
WAN PPPoE Configuration | 34 |
Enable PPPoE | 34 |
Authentication | 34 |
Settings | 34 |
Idle Timeout | 34 |
Echo Timeout | 34 |
Echo Count | 34 |
Service Name | 34 |
AC Name | 34 |
MAC Spoofing Configuration | 35 |
WAN MAC Address (Spoofed) | 35 |
MTU Size | 35 |
MTU (Maximum Transfer Unit) Size | 35 |
Internet VLAN Configuration | 35 |
Internet VLAN Tag | 35 |
Internet Priority Tag | 35 |
Saving your work | 36 |
QoS (Quality of Service) | 36 |
Enable Voice QoS | 36 |
Assured Bandwidth for Voice | 36 |
Maximum Uplink Bandwidth Allowed | 36 |
Saving your work | 36 |
ToS/DiffServ | 37 |
Saving your work | 37 |
IPSec Configuration | 38 |
| 5 |
