Paxar 9445 manual Loading Fan-Fold Supply

9445 Equipment Manual

Loading Fan-Fold Supply

The 9445 has the ability to print fan-fold supply with the optional fan-fold printer cover. If your printer does not have a fan-fold slot, contact Monarch Service to order a fan-fold printer cover.

To load fan-fold supply:

1.Open the front panel.

2.Open the printhead by turning the printhead lever to the left.

3.Fan all four sides of the supply stack and straighten any curved or bent corners. This will prevent supply from sticking together and causing feed jams.

4.Place the supply approximately one fan-fold length behind the printer, label side up.

Printhead Printhead Lever

Upper Supply

Guide

Space supply at least one fan-fold length from printer

Exit	Lower
	Supply	Out-of-Stock
Chute	Guide	Switch	Slot

5.Feed the supply through the slot in the back of the printer and past the out-of-stock switch.

2-16