Paxar 9445 manual Socket Power Cord RS-232 Cable

9445 Equipment Manual

CAUTION

If your 9445 printer has been in storage below room temperature, allow 10-12 hours for the printer to adjust to room temperature before turning the power on. Failure to do this may damage the printer.

3.Turn the power switch off and insert the power cord into the socket. Plug the other end of the cord into a grounded 115 VAC electrical outlet.

NOTE: If you are going to use the printer online, also connect the RS-232 cable.

Socket

Power Cord

RS-232 Cable

4.On the initial startup, leave the printer on for 24 hours to charge the new backup batteries.

1-2