Manuals / Paxar / Computer Equipment / Printer

Paxar 9445 manual Adjusting the Display, Loading the Ribbon Cassette

Models: 9445

1 50

Download 50 pages 20.62 Kb

Page 37

4. Adjusting the Display

4. Adjusting the Display

The intensity adjustment wheel is on the right side of the keyboard. Rotate the wheel to lighten or darken the display.

NOTE: See you Operator’s Handbook for a description of the keyboard keys.

Intensity Adjustment Wheel

Loading the Ribbon Cassette

4-1

Image 37

Paxar 9445 manual Adjusting the Display, Loading the Ribbon Cassette

Contents

Equipment Manual CANADIAN D.O.C. WARNING Operator’s PrefaceHandbook User’s Manual9445 Equipment Manual Appendix A. Converting the Keyboard for Table of ContentsPrinter Appendix C. SpecificationsSupplies 9445 Equipment Manual1. Installing the Printer Socket Power Cord RS-232 Cable 2. Loading Supply Non-Peel Mode2. Turn the printhead lever to the left to release the printhead Loading Supplies Supply Core Supply Shaft Outer Supply Holder2. Loading Supply Supply Shaft a. Remove the hub from the inner supply holderPrintable Side Inside Inner Supply Holder10. Push the lock to the left to secure the outer supply holder 11. Pull enough supply from the roll to reach the printhead WIDE for supply greater than two inches in width NARROW for supply two inches in width or smallerPrinthead Lever Peel Mode3. If you are reloading supply Supply Shaft 2-10Printable Side Inside Inner Supply Holder10. Push the lock to the left to secure the outer supply holder 2-1113. Insert the backing paper under the clamp 2-12Labels Backing Paper 2-13Loading Supplies 2. Loading SupplyNARROW for supply two inches in width or smaller 2-14WIDE for supply greater than two inches in width 17. Turn the printer on. If you are 2-152-16 Loading Fan-Fold Supply7. Close the printhead by turning the printhead lever to the right 2-172-18 Adjusting the Supply SensorDie cut supply requires no sensor adjustment 2-192-20 Adjusting the On Demand SensorOn Demand Sensor 3. Loading a Ribbon Loading a Ribbon Roll 5. Be sure the thermal supply indicator is pointing upward 8. Slide the ribbon spool holders against the spools 14. Close the front panel Loading a Ribbon Cassette 3. Loading a Ribbon Loading a Ribbon Roll5. Guide the edge of the ribbon around the ribbon guide post Loading the Ribbon Cassette 4. Adjusting the Display9445 Equipment Manual Cleaning the Printhead and Platen Roller 5. Cleaning the Printhead and Platen Roller9. If printing is not improved, call Monarch Service 7. Turn the power on 8. Press f twice to realign the supplyPrinthead Platen Roller 9445 Equipment ManualConverting the Keyboard for Table Top Use Appendix A. Converting the Keyboard for Table Top Use9445 Equipment Manual Head Test Failure Message Appendix B. TroubleshootingStart-Up and Printing Troubleshooting Start-Up and Printing continuedCutting Printer Appendix C. SpecificationsSupplies Page For supplies, service, or assistance call TOLL FREEPrinted in U.S.A