C l e a r i n g S u p p l y J a m s
To clear a supply jam:
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector by gently pressing down on it with two fingers.
4. Remove the supplies. See “Removing Supplies” in Chapter 3.
5. Carefully remove any jammed supply and close the deflector.
NOTE: Do Not pull the jammed supply out through the front of the label deflector. Do Not use sharp objects to remove jammed supplies.
6. Carefully remove any jammed supply between the pinch and feed rollers.
Pinch Roller (Feed Roller is behind it)
7. Reload the supplies and close the label deflector.
Care and Maintenance
