Rated Power (2 x 4 ohms):
150 watts @ 20 Hz - 20 kHz, both channels driven at < 0.05% THD
Rated Power (2 x 8 ohms): 100 watts @ 20 Hz - 20 kHz, both channels driven at < 0.05% THD
Rated Power (1 x 4 ohms):
160 watts @ 1 kHz at < 0.01% THD
Rated Power (1 x 8 ohms):
110 watts @ 1 kHz at < 0.005% THD
Minimum load impedance: 4 ohms
Maximum RMS Voltage Swing: 35 volts
Frequency Response:
10 Hz - 25 kHz; +0,
Power Bandwidth:
10 Hz - 100 kHz; +0,
THD (2 x 4 ohms):
<0.05% @ 150W from 20 Hz - 20kHz with both channels driven
THD (2 x 8 ohms):
<0.05% @ 100W from 20 Hz - 20kHz with both channels driven
THD (1 x 4 ohms):
< 0.01% @ 170W @ 1 kHz
THD (1 x 8 ohms):
< 0.005% @ 110W @ 1 kHz
SMPTE IMD:
<0.1% 60 Hz and 70 kHz, 150W @
4 ohms
IA™ 200 SPECIFICATIONS
Slew Rate:
Damping Factor (8 ohms): > 550:1 @ 20 Hz
Input CMRR:
>
Voltage Gain:
x40 (32 dB) standard, x20 (26 dB) internally
Input Sensitivity (x40):
.61 volts @ ohms, .71 volts @ 8 ohms
Input Sensitivity (x20):
1.23volts @ 4 ohms, 1.4 volts @ 8 ohms
Input Impedance: 20 k
Hum and Noise:
>
Crosstalk:
>
Current Draw @ 1/8 power:
330 watts @ 4 ohms, 230 watts @
8 ohms
Current Draw @ 1/3 power:
550 watts @ 4 ohms, 330 watts @
8 ohms
Idle Current Draw:
25 watts in Standby Mode
Maximum Current Draw:
800 watts @ 4 ohms, 510 watts @
8 ohms
Thermal Emissions (btu/hr.): 1,364 @ 1/3 power 4 ohms, 443 @ 1/3 power 8 ohms
Cooling:
80mm DC fan, off until heatsinks reach 45o C, then variable speed
Controls:
2 rear panel attenuators, sequential turn on/off
Indicator LEDs:
2 Clip, 2 Signal, 2 LFC, 1 Protect,
1 Power
Protection:
Temp., DC,
Connectors:
Construction:
18 ga. steel reinforced with 12 ga. rack ears, extruded aluminum front panel
Dimensions:
3.48" x 19" x 16.4" (15.8" behind rear mounting ears)
88.4mm x 483mm x 416.6mm (401mm behind rear mounting ears)
Gross Weight:
33 lbs. (15 kg)
Net Weight:
29.6 lbs. (13.4 kg)
TM®
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
13
