Peavey IA 800V, IA 400V Minimum Load Impedance IA 200V-70 50 ohms, Maximum RMS Voltage Swing

CARACTÉRISTIQUES IA ™ 200V

Rated Power (two channels): 100 watts @ 20 Hz - 20 kHz, both channels driven at < 0.1% THD

Rated Power (one channel): IA 200V-70:

108 watts @ 1 kHz at < 0.008% THD IA 200V-100:

110 watts @ 1 kHz at < 0.015% THD

Minimum Load Impedance: IA 200V-70: 50 ohms

IA 200V-100: 100 ohms

Maximum RMS Voltage Swing:

IA 200V-70: 83 volts

IA 200V-100: 117 volts

Frequency Response:

10 Hz - 25 kHz; +0, -3 dB at 1 watt

Power Bandwidth:

10 Hz - 100 kHz; +0, -3 dB at rated power

THD (two channels driven):

<0.1% @ 100W from 20 Hz -

20 kHz with both channels driven

THD (one channel driven): IA 200V-70:

<0.005% @ 100W @1 kHz IA 200V-100:

<0.015% @ 100W @ 1 kHz

SMPTE IMD:

< 0.1% 60 Hz and 7 kHz, @ 100W

Slew Rate:

IA 200V-70: 30V/µs

IA 200V-100: 40V/µs

Damping Factor:

IA 200V-70:

>1000:1 @ 20 Hz - 400 Hz IA 200V-100:

>2000:1 @ 20 Hz - 400 Hz

Input CMRR:

> -65 dB @ 1 kHz

Voltage Gain:

x40 (32 dB) standard, x20 (26 dB) internally jumper-selectable

Input Sensitivity:

IA 200V-70:

1.77volts or 3.54 volts for rated out

put

IA 200V-100:

2.5volts or 5 volts for rated output

Input Impedance:

20 k ohms, balanced

Hum and Noise:

IA 200V-70:

>-110 dB, "A" weighted referenced to rated power

IA 200V-100:

>-115 dB, “A” weighted referenced to rated power

Crosstalk:

>-70 dB, “A” weighted referenced to rated power

Current Draw @ 1/8 power: IA 200V-70: 165 watts

IA 200V-100: 217 watts

Current Draw @ 1/3 power: IA 200V-70: 290 watts

IA 200V-100: 315 watts

Idle Current Draw:

IA 200V-70:

38 watts in Standby Mode IA 200V-100:

45 watts in Standby Mode

Max. Current Draw:

IA 200V-70: 485 watts

IA 200V-100: 475 watts

Thermal Emissions (BTU/hr.):

IA 200V-70: 760 watts @ 1/3 power

IA 200V-100: 850 watts @ 1/3 power

Cooling:

80mm DC fan, off until heatsinks reach 45oC, then variable speed

Controls:

2 rear panel attenuators, sequential turn on/off

Indicator LEDs:

2 Clip, 2 Signal, 2 LFC, 1 Protect,

1 Power

Protection:

Temp., DC, turn-on bursts, subsonic, incorrect load or short

Connectors:

8-pin plugable signal input, 4-pin plugable sequential power,

4-terminal barrier strip, IEC AC power connector

Construction:

18 ga. steel reinforced with 12 ga. rack ears, extruded aluminum front panel

Dimensions:

3.48" x 19" x 16.4" (15.8" behind rear mounting ears)

88.4mm x 483mm x 416.6mm (401mm behind rear mounting ears)

Gross Weight:

IA 200V-70: 32.2 lbs. (14.6 kg.)

IA 200V-100: 27.5 lbs. (12.5 kg.)

Net Weight:

IA 200V-70: 29.7 lbs. (13.5 kg.)

IA 200V-100: 25.3 lbs. (11.5 kg.)

®

TM

Etant donnés nos efforts constants pour l’amélioration de notre matériel,

les caractéristiques et spécifications listée ici peuvent être modifiées sans préavis.

46