IA800V SPECIFICATIONS

Rated Power (two channels): 400 watts @ 20 Hz - 20 kHz both channels driven at < 0.1% THD

Rated Power (one channel):

415 watts @ 1 kHz at < 0.01% THD

Minimum Load Impedance: IA 800V-70: 12.5 ohms

IA 800V-100: 25 ohms

Maximum RMS Voltage Swing: IA 800V-70: 85 volts

IA 800V-100: 110 volts

Frequency Response:

10 Hz - 25 kHz; +0, -.3 dB at 1 watt

Power Bandwidth:

IA 800V-70:

10 Hz - 100 kHz; +0, -3 dB at rated power

IA 800V-100:

10 Hz - 50 kHz; +0, -3 dB at rated power

THD (two channels driven): IA 800V-70:

<0.15% @ 400W from 20 Hz - 20 kHz with both channels driven

IA 800V-100:

<0.1% @ 400W from 20 Hz - 20 kHz with both channels driven

THD (one channel driven):

<0.008% @ 400W @ 1 kHz

SMPTE IMD:

< 0.1% 60 Hz and 7 kHz, @ 400W

Slew Rate:

35V/µs

Damping Factor:

> 400:1 @ 20 Hz - 400 Hz

Input CMRR:

> -65 dB @ 1 kHz

Voltage Gain:

x40 (32 dB) standard, x20 (26 dB) internally-jumper selectable

Input Sensitivity:

IA 800V-70:

1.77volts or 3.54 volts for rated output

IA 800V-100:

2.5volts or 5 volts for rated output

Input Impedance:

20 k ohms, balanced

Hum and Noise:

>-108 dB, “A” weighted referenced to rated power

Crosstalk:

>-65 dB, “A” weighted referenced to rated power

Current Draw @ 1/8 power: IA 800V-70: 765 watts

IA 800V-100: 775 watts

Current Draw @ 1/3 power: IA 800V-70: 1,100 watts

IA 800V-100: 1,150 watts

Idle Current Draw:

45 watts in Standby Mode

Maximum Current Draw:

IA 800V-70:

1,680 watts for rated power IA 800V-100:

1,700 watts for rated power

Thermal Emissions (BTU/hr.):

IA 800V-70:

2,841 watts @ 1/3 power IA 800V-100:

3,015 watts @ 1/3 power

Cooling:

120mm DC fan, off until heatsinks reach 45oC, then variable speed

Controls:

2 rear panel attenuators, sequential turn on/off

Indicator LEDs:

2 Clip, 2 Signal, 2 LFC, 1 Protect,

1 Power

Protection:

Temp., DC, turn-on bursts, subsonic, incorrect load or short

Connectors:

8-pin plugable signal input, 4-pin plugable sequential power,

4-terminal barrier strip, IEC AC power connector

Construction:

18 ga. steel reinforced with 12 ga. rack ears, extruded aluminum front panel

Dimensions:

5.25" x 19" x 16.4" (15.8" behind rear mounting ears)

133mm x 483mm x 416.6mm (401mm behind rear mounting ears)

Gross Weight: 51.4 lbs. (23.3 kg.)

Net Weight:

45 lbs. (20.41 kg.)

®

TM

Due to our efforts for constant improvements,

features and specifications listed herein are subject to change without notice.

18

Page 18
Image 18
Peavey IA 200V, IA 400V, IA Series owner manual IA 800V Specifications, Minimum Load Impedance IA 800V-70 12.5 ohms