Pelco DX4700, DX4800 manual Activating Presets, Activating Patterns

ACTIVATING PRESETS

1.Click a camera pane.

2.On the toolbar, click PTZ . The PTZ control is displayed.

Figure 9. PTZ Operation

3. Click the number pad on the PTZ control, and then click PRESET. The camera moves to the preset location.

ACTIVATING PATTERNS

A pattern is a user-defined, viewable camera path with a specified beginning and end. Patterns are made up of a sequence of standard pan/tilt and lens commands. Patterns are stored in the internal memory of the PTZ device that is connected to the HVR. Depending on the type and configuration of the PTZ device, the unit can address up to four unique PTZ patterns. Once defined, a pattern can be activated with a series of on-screen commands and will run continuously until it is deactivated.

To activate a pattern:

1.Click a camera pane, and then click PTZ .

2.Click the number pad on the PTZ control, and then click PATTERN. The pattern runs.

3.To halt the pattern, click the Move buttons .

C4655M (2/11) 17