Pelco DX4800, DX4700 manual PTZ Control

PTZ CONTROL

The PTZ control is available for cameras that support PTZ functions using Pelco C, Pelco P, and Pelco D protocols. It is also available for supported third-party dome cameras.

NOTE: When operating third-party cameras, the PTZ control supports the up, down, left, right, zoom in, and zoom out functions.

Figure 3. PTZ Control

Exit: Closes the PTZ control.

Move: Pans and tilts the camera in the direction of the selected arrow.

	Speed: Selects the PTZ speed.
	ZOOM: Zooms the camera in and out.
	FOCUS: Adjusts the camera focus.
	IRIS: Opens and closes the camera iris.
	PRESET NUMBER: Displays the preset number.
	Keypad: Use the numeric keypad to enter presets or pattern numbers.
PRESET	PRESET: Performs two functions:

•Preset programming mode: Stores the preset in the selected memory location.

•PTZ mode: Activates a preset.

PATTERN PATTERN: Performs two functions:

•Pattern programming mode: Stores the pattern in the selected memory location.

•PTZ mode: Activates a pattern.

SET SET: Performs two functions:

•Enters PTZ configuration mode.

•Exits PTZ configuration mode.

CLR	Clear: Deletes a configuration preset, pattern, or tour.
AUX	Program: Accesses the camera configuration mode.
PGM	Auxiliary: Unsupported at this time.

10 C4655M (2/11)