Pelco DX4700 Appendix J Factory Defaults, Menu Submenu Property Setting Factory Default Setting

APPENDIX J: FACTORY DEFAULTS

You can reset the HVR to its original factory settings by importing or exporting the configuration settings. Some options cannot be reset (date, time, daylight saving, time zone, and user password settings).

•Configuration Import: Imports the HVRs configuration data from the USB memory stick.

•Configuration Export: Exports the configuration data from this HVR to the USB memory stick.

NOTE: If you use a USB memory stick or USB HDD for configuration import/export you must disconnect the other external USB devices.

Table I. Factory Default Settings (1 of 6)

Menu	Submenu	Property	Setting	Factory
				Default Setting
Camera	Camera	Channel (Ch)	01 to 16, IP1, IP2 (cannot be changed)	01 to 16, IP 01, IP 02
		Name	CH 01 to CH 16, IP 01, IP 02	CH 01 to IP 02
		Audio	OFF, 01 to 04	OFF
		Disable	OFF, ON	OFF
	PTZ*	Channel	CH 01	CH 01
		Port	NONE	NONE
		Control ID	00*	N/A
		Protocol	PELCO_D*	PELCO_D
		Baud Rate	9600*	9600
		PTZ Test	N/A*	N/A
	IP Camera	Channel	IP 01	IP 01
		Vendor	NONE, AXIS, PELCO	NONE
		Model Name	N/A*	N/A
		IP Address	N/A*	N/A*
		User Name	N/A*	N/A
		Password	N/A*	N/A*
		Port	554*	554
		Test	N/A*	N/A
	ATM/POS	Interface Device	DEFAULT, AVE Hydra	DEFAULT
		Camera	CH 01 to CH 16	CH 01
		Baud rate	1200 to 115200	9600
		Data Bits	5 to 8	8
		Stop Bits	1	1
		Parity	NONE	NONE
	Storage	Overwrite	ALL	ALL
		Full Warning	OFF	OFF
		Auto Delete	OFF	OFF
		Event Partition	50%	50%
		N/A*	FORMAT	FORMAT

*This setting is only available when an associated setting is selected.

C4655M (2/11) 83