<Note>
1.Configuration a sensor is to set On/Off usage and type.
2.Please refer to “Alarm Rec” for saving and “Alarm Act” for
9.2.Connecting & configuring relay out
9.2.1. Specifications
In order to run relay output of eDVR MD3200M normally, the following conditions are required.
| Output Ch. | 4Ch relay differential outptus | |
|
|
| |
Spec. | Output type | Dry Contact | |
|
|
| |
| Connecting type | Connect the trimmed wire to terminal block | |
|
|
| |
| DC | 24V DC, 1.25A, 30W | |
|
|
| |
정격 |
| 125V DC, 0.24A, 30W | |
|
| ||
AC | 125V AC, 0.5A, 62.5VA | ||
| |||
|
|
| |
|
| 250V AC, 0.25A, 62.5VA | |
|
|
|
28
