INSTALLATION AND CONNECTION

4.Connecting & Running

4.1. Connecting camera

(1)Connect CCTV camera to MD3200M with BNC cable as below.

<Note>

1.The video type for all channels should be either NTSC or PAL, not be combined both.

2.MD3200M sets video signal’s impedance (75Ω ) automatically.

75-Ohm termination register is always connected on video input, and can't be removed. So MD3200M's video input must be a terminal of the connection.

3.Video Type(NTSC/PAL) should be changed after opeting MD3200M. The order of camera recognition follows Ch1 camera through Ch32 camera and 1st recognized camera type leads other camera type.

4.2.Connecting monitor

(1) Connect CCTV monitor to MD3200M with BNC cable as shown below;

11

Page 11
Image 11
Pelican MD3200M manual Connecting & Running, Connecting camera, Connecting monitor