9.5.Connecting USB device
USB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connecting USB Device, do not exceed the rated values of USB device as below;
USB Spec. | Ver 1.1 (Max 12M bps) |
Available Device | USB Memory Stick, |
Output Voltage/Current | Max. 200mA per DC 5V/ Port |
<Note>
The disk should be formatted with FAT32 type.
If properly connected the disk is recornized automatically as in the following pricutre. To copy images the process is as follows; Set copy range (up to 1minute) Select drive Copy
<Note>
1.USB Flash products that required a Windows program to operate may not be recognized by the eDVR
2.For more information about copy function, please refer to the “eDVR User’s Guide”
37
