122Using the Shake Reduction Function to Prevent Camera Shake

Using the Shake Reduction Function

The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed.

Ideal when taking pictures in the following situations.

•When taking pictures in dimly lit locations, such as indoors, at night, on cloudy days and in the shade

•When taking telephoto pictures

The Shake Reduction function can be used to reduce horizontal and

4 vertical camera shake or keep the image level.

Functions Shooting

•The Shake Reduction function does not compensate for blurring caused by subject movement. To take pictures of a moving subject, increase the shutter speed.

•The Shake Reduction function may not fully reduce camera shake when taking close-up shots. In this case, it is recommended to turn off the Shake Reduction function and use the camera with a tripod.

•The Shake Reduction function will not fully work when shooting with a very slow shutter speed, for example when panning or shooting night scenes. In this case, it is recommended to turn off the Shake Reduction function and use the camera with a tripod.

•The Shake Reduction function is available with any PENTAX lens compatible with this camera. However, be sure to set the focal length before using a lens for which focal length information cannot be automatically obtained. Refer to “When the Focal Length Cannot Be Automatically Detected” (p.124) for details.

Reducing Vertical and Horizontal Camera Shake

1 Select [Shake Reduction] in the [ARec. Mode 4] menu and press the four-way controller (5).

2 Use the four-way controller (23) to select kor land press the 4button.

kUsessetting)Shake Reduction. (default

lDoes not use Shake Reduction.

1 2 3 4 5

Movie

Live View

Electronic Level

Horizon Correction

Shake Reduction

Input Focal Length

GPS

MENU Cancel

OK OK