314
11
Appendix
Problem | Cause | Remedy | |
Autofocus | The focus mode is | Set the focus mode switch to lor A. | |
does not work | set to \ | ||
|
| Autofocus is not locked (focus lock) when | |
|
| the focus mode is set to k(A). The | |
The focus | The focus mode is | camera will continue focusing on the subject | |
cannot be | while the shutter release button is pressed | ||
locked | set to k | halfway. If there is a subject that you wish to | |
| |||
|
| focus on, slide the focus mode switch to | |
|
| land use the focus lock. (p.108) | |
The AE Lock | The exposure | Set the exposure mode to any mode other | |
function does | mode is set to B, | than B(Green), p(Bulb Exposure) or M | |
not operate | por Mmode | (Flash | |
|
|
| |
|
| Only C(Auto Flash Discharge) and D | |
|
| (Auto | |
|
| available for the flash mode when the | |
The | The exposure | exposure mode is B(Green). The flash will | |
flash does not | mode is set to B | not discharge when the subject is bright in | |
discharge | mode | these modes. In the exposure modes other | |
|
| than B, only the flash mode that | |
|
| discharges every time the flash recharges is | |
|
| available. Try different exposure modes. | |
The USB |
|
| |
connectionwith | The USB | Set [USB Connection] to [MSC] in the [R | |
a computer | connection mode is | ||
does not work | set to [PTP] | ||
| |||
properly |
|
| |
|
|
| |
| The Shake | Set [Shake Reduction] to k(On) in the | |
| Reduction function | ||
| [ARec. Mode 4] menu. (p.122) | ||
| is off |
| |
| The Shake | If a lens for which the focal length | |
| information cannot be obtained is used, set | ||
| Reduction function | ||
| is not set properly | the focal length in the [Input Focal Length] | |
Shake | screen. (p.124) | ||
| |||
Reduction | Shutter speed is too |
| |
does not work | low for the Shake |
| |
| Reduction function | Turn off the Shake Reduction function and | |
| to be effective when | use a tripod. | |
| panning or shooting |
| |
| night scenes, etc. |
| |
| The subject is too | Move away from the subject, or turn off the | |
| close | Shake Reduction function and use a tripod. |