186

4

5

6

67

ShootingSettings 8

Press the shutter release button fully.

Set the focus mode to \when the shutter cannot be released. The screen to select the measuring range is displayed.

Use the rear e-dial (S) to select

 

 

 

1

 

 

the entire screen or spot area for

 

 

 

the measuring range.

 

 

 

 

 

 

 

MENU Cancel

OK OK

When a spot area is selected, use the four-way controller (2345) to move the frame to the position you want to measure.

Press the 4button.

The white balance is measured, and the screen that was displayed in Step 3 appears again.

Adjust the white balance as necessary.

The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4button to remeasure the white balance.

Press the 4button twice.

The camera is ready to take a picture.

•If a picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust exposure to the correct amount level before adjusting the white balance.

•When the mode dial is set to C (Movie), the white balance cannot be measured. Adjust the white balance in any exposure mode other than C before recording a movie.