150

17AE Lock

18Shutter speed

19Aperture value

20EV bar

21Sensitivity

22Remaining image storage capacity

23Main face detection frame (Face Detection AF)

24Face detection frame (Face Detection AF)

4 ShootingFunctions

*Indicator 9 is displayed when switching to Live View after adjusting the composition in [Composition Adjust.] (p.195) in the [ARec. Mode 2] menu.

*Indicator 11 is displayed only when the optional GPS unit is attached to the camera and is operating. (p.305)

*Indicator 12 is displayed when [Electronic Level] is set to O(On). (p.262)

*Indicator 14 (Phase Difference AF frame) is displayed in white during Live View. When the subject is in focus, a green square frame is displayed instead. It turns red when the subject is not in focus. It is not displayed when the focus mode is set to \.

*When 18, 19, and 21 can be changed, 5appears next to the set value.

*Indicators 23 and 24 are displayed when [Autofocus Method] is set to I and the camera detects person’s face(s). When the subject is in focus, a green frame is displayed. It turns red when the subject is not in focus.

Available operations

Mbutton

Enlarges the image.

 

2, 4, or 6 times original size (when the focus mode is =)

 

2, 4, 6, 8 or 10 times original size (when the focus

 

mode is \)

button

Returns the position of the display area to the center

 

(during enlarged view).

Press and hold 4 Switches the function of the four-way controller

button *1

(2345) to Change AF point or direct key operation.

4button *1

Returns the position of the AF point to the center

 

(when Change AF point is enabled).

Four-way controller

Changes the AF point (when Change AF point is enabled).

(2345)

Moves the display area (during enlarged view).

*1 Available only when [Autofocus Method] is Ior i, and the focus mode is l or the AF point switching dial is set to j(Select).

3 Position the subject on the monitor and press the shutter release button halfway.

The autofocus system operates.

When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen.

4 Press the shutter release button fully.

The picture is taken.