The [Flash Mode] screen appears.
3 Select rand press the 4 button.
Press the Ebutton.
The camera is ready to take a picture.
The channel for the built-in flash is displayed in the viewfinder and on the LCD panel. The factory default setting is CH1.
Remove the external flash unit after the channel is set on the camera, and place it at the desired location.
Press the four-way controller (3).
0.0
Flash Mode
Wireless Mode

171

Wireless Shooting Using a Combination of the Built-in Flash and an External Flash Unit

Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.

1

2

MENU Cancel

OK OK

4

5 Confirm that both flashes are fully charged, and then take

apicture.

•rcannot be set when the exposure mode is set to B(Green).

•When the drive mode is set to i (Remote Control (3s delay)), d(Mirror Lock-up) or e(Mirror Lock-up + Remote Control), or the lens aperture is not set to the s position, rcannot be selected.

5

the Using Flash