72

Using Built-in Flash

1 Press the Ebutton.

3 BasicOperations

The built-in flash pops up and begins charging. When the flash is fully charged, Eappears in the viewfinder and on the LCD panel. (p.36, p.38)

2 Press the shutter release button fully.

The picture is taken.

When the mode dial is at B, the flash is not discharged if the lighting conditions do not require flash for correction even when the flash is popped up.

[Flash On] is used if the flash is popped up when the mode dial is at a position other than B.

3 Push down on the portion indicated in the illustration to retract the built-in flash.