Pentax 12050, K-5 II, K-5 IIs 313

	Error message	Description
	Battery depleted	The battery is exhausted. Install a fully charged
	Battery depleted	battery in the camera. (p.49)
		battery in the camera. (p.49)
	Not enough battery	Appears during sensor cleaning if the battery
	Not enough battery	level is insufficient. Install a fully charged
	power remaining to	level is insufficient. Install a fully charged
	power remaining to	battery or use an AC adapter kit (optional).
	clean sensor	battery or use an AC adapter kit (optional).
	clean sensor	(p.52)
		(p.52)

	Not enough battery	Appears during pixel mapping if the battery
	Not enough battery	level is insufficient. Install a fully charged
	power remaining to	level is insufficient. Install a fully charged
	power remaining to	battery or use an AC adapter kit (optional).
	activate Pixel Mapping	battery or use an AC adapter kit (optional).
	activate Pixel Mapping	(p.52)
		(p.52)

		The maximum folder number (999) and file
	Image folder cannot be	number (9999) are being used, and no more
	created	images can be saved. Insert a new SD Memory
		Card or format the card. (p.246)
	Unable to store image	The image could not be saved because of an
	Unable to store image	SD Memory Card error.
		SD Memory Card error.
		The DPOF settings could not be saved because
	Settings not stored	the SD Memory Card is full. Delete unwanted
		images and perform DPOF setting again. (p.74)
	The operation could not be	The camera was unable to measure the manual
	The operation could not be	white balance (p.185) or detect dust on the
	completed correctly	white balance (p.185) or detect dust on the
	completed correctly	sensor (p.301). Try the operation again.
		sensor (p.301). Try the operation again.

		You cannot select more than the maximum
	No more images can be	number of images for Index (p.215), Select &
	selected	Delete (p.220), Developing Multiple RAW
		Images (p.240) and DPOF (p.271).
		There are no images that can be processed
	No image can be processed	using Digital Filter (p.233) or RAW
		Development (p.238).
		Appears when you try to perform Save as
		Manual WB (p.187), Resize (p.230), Cropping
	This image cannot be	(p.231), Digital Filter (p.233), or RAW
	This image cannot be	Development (p.238) for images captured with
	processed	Development (p.238) for images captured with
	processed	other cameras, or when you try to perform
		other cameras, or when you try to perform
		Resize or Cropping for minimum file size
		images.
	The camera failed to create	The creation of an index print image failed.
	an image	(p.215)
	Camera overheated.	Live View cannot be used because the
	Camera overheated.	camera’s internal temperature is too high.
	Disabling Live View temporarily	camera’s internal temperature is too high.
	Disabling Live View temporarily	Press the 4button and try using Live View
	to protect circuitry	again when the camera has cooled down.
		again when the camera has cooled down.

311

Appendix