Electronic level display
This camera is equipped with an electronic level for detecting whether the camera is level. When [Electronic Level] is set to O(On), press the Mbutton while the control panel is displayed to view the electronic level. When [Electronic Level] is assigned to the /Y button, press the /Ybutton to switch the display on/off.
A bar graph indicating the horizontal camera angle appears at the bottom of the screen, and a bar graph indicating the vertical camera angle appears on the right side.
Example:
Horizontally and vertically | Tilted 1.5° to the left (yellow) | ||||||||||||||
| level (green) |
| Vertically level (green) | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outside horizontal level | Horizontally level (green) |
display (red) | Outside vertical level |
Tilted 5° up (yellow) | display (red) |
• [Electronic Level] is P(Off) by default. Set in the [ARec. Mode 4] menu. (p.262)
•Refer to p.249 for assigning a function to the /Ybutton.
•The electronic level display will disappear if no operations are made within 1 minute.
•If the camera angle cannot be detected, both ends and the center of the bar graphs flash red.
29
1
Using Before
Camera Your