Correcting Defective Pixels in the

273

CMOS Sensor (Pixel Mapping)

 

Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.

1 Select [Pixel Mapping] in the [RSet-up 4] menu and press the four-way controller (5).

The [Pixel Mapping] screen appears.

2 Press the four-way controller (2) to select [Pixel Mapping] and press the 4button.

Defective pixels are mapped out and corrected, and the screen that was displayed before selecting the menu appears again.

When the battery level is low, the message [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit (optional) or change to the battery with ample power remaining.

9

Settings Additional Changing