Important for the United Kingdom
Thisapparatus is fitted with an approved moulded 13 Amp
plug.To change a fuse in this type of plug proceed as follows:
aRemovefuse cover and fuse.
bFixnew fuse which should be a BS1362 5A, A.S.T.A. or
BSIapproved type.
cRefitthe fuse cover.
Ifthe fitted plug is not suitable for your socketoutlets, it should
becut off and an appropriate plug fitted in its place.
Ifthe mains plug contains a fuse, this should have a valueof
5A.If a plug without a fuse is used, the fuse at the distribution
boardshould not be greater than 5A.
DNote:* The severed plug must be destroyed to avoid
apossible shock hazard should it be insertedinto a
13Asocket elsewhere.
Howto connect a plug:
Thewires in the mains lead are coloured in accordance with
thefollowing code:
BLUE- ’NEUTRAL’ (’N’)
BROWN- ’LIVE’ (’L’)
dTheBLUE wire must be connected to the terminal which
ismarked with the letter ’N’ or coloured BLACK.
eTheBROWN wire must be connected to the terminal
whichis marked with the letter ’L’ or coloured RED.
fDonot connect either wires to the earth terminal in the
plugwhich is marked with the letter ’E’ or by the safety
earthsymbol \or coloured green or green-and-yellow.
Beforereplacing the plug cover, make certain that the cord
gripis clamped over the sheath of the lead - not imply over the
twowires.
Placing the batteries in the remote control
aOpenup the battery compartment of yourremote control
andplace the batteries in it as shown in the picture.
bClosethe battery compartment.
1. CONNECT THE TV-VIDEO COMBI4