NetCam2 _ii_00592en.qxd | 1/23/03 2:22 PM Page 22 | |
| NetCam2 | Section 3 |
•‘Frame rate’: Select the image transmission speed.
Note: Transmission speed depends on network capacity and PC performance. NetCam2 transmits a maximum of 30 frames per second, and total number of frames transmitted by all 4 channels cannot exceed this.
•‘Greymode’: switches to monochrome images (reduces amount of data transmitted and therefore increases maximum frame rate.
•‘Progressive’: builds up image from low- to
Note: Progressive mode allows a
•‘Single shot’: freezes the image after completion of the download (also used in combination with ‘Progressive mode’).
Menu buttons
The Full viewer has six menu buttons. They are:
•Home: goes to the NetCam2 homepage.
•Admin: goes to the administration pages for setting passwords, etc. (refer to section 4).
•Help: goes to the help page.
•Svr Push: for
•
•Capture: saves a screen grab as a .BMP bitmap (for importing into Windows programs) or .EYE (for viewing in browser).
22