NetCam2 _ii_00592en.qxd | 1/23/03 2:22 PM Page 31 | |
| NetCam2 | Section 4 |
•Administrator’s E-mail Address – type in the administrator’s e-mail address (this information is for information only).
•Initialize Flash Info – this resets the internal system setting to the factory defaults. Some settings, such as ‘Date & Time’, ’Model’, and ‘Serial Number’ in ‘System’ menu, ‘IP configuration’ in ‘Network’ menu, and all items in ‘Video’ menu, are not changed.
•Rebooting: If NetCam2 has any problem, use this button to reboot without switching off the power supply. It takes about 30 seconds.
4.2.2User Configuration
This page defines IDs, passwords and access rights for the administrator and up to five users.
Note: If the NetCam2 should be open to everyone, do not change the default user IDs and passwords. Otherwise, you must change all user account names.
31
