Philips xDSL Interface, PSTN Interface, NetCam2, User ID - enter the user password for PPPoE

NetCam2 _ii_00592en.qxd		1/23/03 2:22 PM Page 34
	NetCam2	Section 4

xDSL Interface

If the NetCam2 is connected to an xDSL line and uses PPPoE communication, select 'xDSL Interface'

•User ID – enter the user password for PPPoE

•Password – enter the user password for PPPoE

PSTN Interface

If the NetCam2 is connected to the Internet via an PSTN line (Public Switched Telephone Network) based on PPP, select 'PSTN(Dial-out)' In this case NetCam2 is connected to a dial-up modem with a serial cable (rather than a LAN cable).

34