NetCam2 _ii_00592en.qxd | 1/23/03 2:22 PM Page 50 | |
| NetCam2 | Section 6 |
6ADJUSTING FOCUS
Screw
1First, adjust focus of the NetCam2 by turning the front focus ring of the lens.
2If you cannot focus with the lens, loosen the screw in the back focus ring.
3 Setting the lens at the middle range, focus by turning the back focus ring. 4 When you have focused, tighten the screw.
5 Complete the focus by turning the front focus ring of the lens.
50