NetCam2 _ii_00592en.qxd | 1/23/03 2:22 PM Page 28 | |
| NetCam2 | Section 4 |
4CONFIGURING ADMINISTRATOR’S OPTIONS
4.1Login
4.1.1Accessing Administration from Setup program
• Click on the MAC address of the NetCam2.
• Type in the administrator’s password and then click the ‘Start Configuration’ button. The setup program automatically connects to the Admin page of NetCam2's Homepage.
4.1.2Accessing through Web browser
•On the Web browser, key in the IP address of the NetCam2 to be configured.
•At the login page, type in the administrator’s ID and password to access the Admin page.
Note: An administrator may also access the NetCam2
Note: The default administrator’s ID and password are both set to ‘admin’. The administrator may change them (max 9 characters) on the Admin page.
•From the NetCam2 homepage, click on 'Administration'.
28