NetCam2 _ii_00592en.qxd 1/23/03 2:22 PM | Page 9 | ||
| NetCam2 |
| Section 1 |
|
|
|
|
| Connector | Description | Remark |
| name |
|
|
| Video | Output of internal camera or input for channel 2 | |
|
| as set by DIP switch |
|
| Zoom Lens | To control zoom and focus adjustment. | |
|
| voltage with common ground |
|
| Network | To connect 10 |
|
| Iris Lens | Video Iris lens connector |
|
| DIP switch | Left:To designate video signal termination of |
|
|
| ‘Video Input’ BNC connector |
|
|
| Right:To select BNC function as input or output | |
| AC 24V/DC 12 V | To connect a power supply unit of 24V AC | |
| DC 12V | To connect a power supply unit of 12V DC | |
| RS232/RS422/RS485/ |
|
|
| Sensor Input | To connect external devices (see detail below) |
|
RS232/RS422/RS485/Sensor Input
Sensor
Power
Connector | Description |
name |
|
SEN | To connect external sensor |
POW | Power supply output (12 Vdc) |
These pins are for devices that satisfy | |
| |
| consist of TX, RX, and GND. |
Satisfies | |
| |
| T+, and |
Satisfies | |
| consist of 485+ and |
| and R- with a wire to get RS422+ and |
| short T+ and T- to get |
|
|
9