NetCam2 _ii_00592en.qxd | 1/23/03 2:22 PM Page 35 | |
| NetCam2 | Section 4 |
•User ID – enter the user password
•Password – enter the user password
To configure the PSTN interface:
•Enter user ID.
•Enter the password thatr you have received from your Internet provider.
•Enter the phone number of your Internet provider (do not forget to add a zero (0) if you have to dial a 0 to obtain an outside line).
•Click on ‘Apply’.
Note Only select ‘Script enable’ if your telephone line needs a special login script to contact ISP.
4.2.4Dynamic IP Registration Service for ISDN, XDSL Users
The dynamic registration function is a means to use the NetCam2 with a dynamically assigned IP address. The NetCam2 is registered under the name as defined in the 'System Configuration' page. The DCHP client Protocol on the 'Network Configuration' page will be enabled. In order to operate the Dynamic IP registration function, a separate server with dedicated software is required in the network. Contact your reseller for support on this function.
Note: It is recommended to use the NetCam2 with a fixed IP address.
If NetCam2 is installed on a network with a dynamic IP address (floating IP address), the NetCam2 must be registered to a ‘dynamic IP registration server’ to give connectivity using the NetCam2 name set in the System Configuration menu. If not done, no one can access the NetCam2 through the Web browser because the IP address access of the NetCam2 is unknown.
4.2.5Security Configuration
This page provides additional protection to restrict access to the NetCam2. An option is provided for activating a firewall function y filtering the IP addresses. An alternative option is to activate image encryption.
35